Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset and Program the Throttle and Throttle Body of the Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide, we will see the necessary instructions to reset and subsequently program the throttle and throttle body of the Honda CR-V. First, get inside the vehicle and connect your recalibration tool (Foxwell NT530) to the OBD port of your car; then turn on the ignition to enable communication with the engine control unit, as illustrated in the video.

At this point, follow the guided procedure to calibrate the throttle/throttle body system, following the video tutorial to the end!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to Programme the Key Remote for the Honda CR-V
How to Programme the Key Remote for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this short and simple guide, you will find the instructions that will allow you to programme the key remote for the Honda CR-V. First, get inside …
How to Activate the Radio of a Honda CR-V
How to Activate the Radio of a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Before starting, sit in the driver's seat of your Honda CR-V. Begin by activating the instrument cluster, which will also turn on the radio. Next, pr…
Replacing the Solenoid on Honda CR-V
Replacing the Solenoid on Honda CR-V
Honda CR-V (2002-2007 / MK 2) Replacing the solenoid purge valve on a Honda CR-V? Open the bonnet, lift it, and secure it. You can work by removing the front wheel. Undo the secur…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos