Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Aftermarket Xenon Headlight Kit

Model: Honda Civic MK 6 - Years 1995-2001
Part: Xenon headlight kit

Open the front bonnet and remove the protective cap from the headlight bulb holder; then disconnect the H4 bulb plug to be replaced with that of the new kit, release the securing clip, and remove the bulb itself. Make a hole in the cap of the bulb holder to allow the wires of the new bulb to pass through and attach the gasket to the newly made hole; then insert the new bulb into the bulb holder, reattach the securing clip, and reapply the cap: repeat the same operation for the other headlight.
Make the electrical connections for the power supply of the control units following the diagram attached to the kit; position the control units in line with the headlights (securely fixing them to the bodywork); carefully position the power wiring of the control units avoiding interference with moving parts or hot areas that could damage it and connect the bulb wiring plugs to the respective control units.
Then turn on the lights and check their correct operation.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Aftermarket Xenon Headlight Kit
Installation of Aftermarket Xenon Headlight Kit
Honda Civic (1995-2001 / MK 6) First, check the compatibility of the Xenon kit with the vehicle, ensure all components are present (two bulbs, two control units, and the wiring har…
Installation of Aftermarket Xenon Headlight Kit
Installation of Aftermarket Xenon Headlight Kit
Honda Civic (1992-1995 / MK 5) Open the bonnet and disconnect the negative terminal of the battery to isolate it. Unclip and remove the air intake duct to gain easier access to the…
Installation of Fog Light Kit
Installation of Fog Light Kit
Honda Civic (2012-2015 / MK 9) Remove the fixing screws of the front grille located in the engine bay and under the bodywork. Once done, completely remove the grille including the …

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos