Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Filter on a Honda CR-V

Model: Honda CR-V MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

How to replace the engine oil and filter on a Honda CR-V? Follow these steps for the replacement of the filter and topping up the fluid: Lift the car using a column lift (hydraulic jack), then, using a socket spanner, undo the large bolt securing the oil sump (located at the bottom of the car); allow the fluid to drain into a disposal container.

Lower the car to the ground and open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard and lift the bonnet; Remove the worn oil filter and position a new one. Top up with new fluid and close the front bonnet.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Honda CR-V
How to Change the Engine Oil and Oil Filter on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today, this short video will show you how to change the engine oil and oil filter on your Honda CR-V. It is not a very complex operation; just take s…
How to Change Engine Oil and Filter on a Honda CR-V
How to Change Engine Oil and Filter on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) How do you change the engine oil and filter on a Honda CR-V? This is a straightforward operation if you follow the right steps. Lift the car on a col…
Replacing Oil Filter on Honda CR-V
Replacing Oil Filter on Honda CR-V
Honda CR-V (2012-2017 / MK 4) How to replace the oil filter on a Honda CR-V? When replacing the filter, it is better to also replace the oil. Lift the car on a jack and unscrew th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos