Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Cruise Control on a Hyundai i10

Model: Hyundai I10 MK 2, IA - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Onboard computer

See other generations:
Video tutorial

Here’s how to activate the cruise control (and speed limiter) on a Hyundai i10: drive until you reach a speed above 18.6 mph. Press the "cruise" button located on the steering wheel; a white light will appear on the dashboard. Once you reach the desired speed, press the "set" button.

The light will turn green, and the car will maintain that speed without pressing the accelerator. Pressing the +/– buttons will increase or decrease the set speed.

To temporarily deactivate, simply press the brake or clutch, and to resume, press the "res" button. To turn off the system, press the "cruise" button again.

The speed limiter sets a maximum limit that cannot be exceeded by pressing the accelerator. Press the "limit" button, reach the speed you wish to set, and press "set"; the vehicle will not accelerate beyond the set limit.

In an emergency, press the accelerator past the resistance point, and the car will alert you with a beep. To deactivate, press the brake or the "limit" button.


Posted on 12 August 2026 by ScegliAuto


Related tutorials

How Cruise Control and Speed Limiter Work on the Hyundai I10
How Cruise Control and Speed Limiter Work on the Hyundai I10
Hyundai I10 (2019-2026 / AC3, AI3) Let’s see how cruise control and the speed limiter work on the Hyundai I10: using the button on the right of the steering wheel, select the mode, whi…
How to Reset the Service Light on a Hyundai I10
How to Reset the Service Light on a Hyundai I10
Hyundai I10 (2019-2026 / AC3, AI3) Let's see how to reset the service light on a Hyundai I10 MK3: on these newer models, the operation is conveniently performed from the steering wheel…
How to Activate Bluetooth on the Hyundai I10
How to Activate Bluetooth on the Hyundai I10
Hyundai I10 (2013-2020 / MK 2, IA) How to activate Bluetooth on the Hyundai I10? After activation, see how to connect your smartphone. Activate the Bluetooth on your smartphone and set…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos