Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Elantra
    4. : Radiator disassembly instructions

Hyundai Elantra - Video tutorial

Model: Hyundai Elantra MK 3, XD - Years 2000-2006
Part: Radiator
Operation: Radiator disassembly instructions

First of all, it is suggested to carry out this maintenance with a cold engine to avoid unpleasant burns. Then open the front hood and unscrew the fixing pins of the brackets that anchor the radiator to the bonnet grille and remove the brackets themselves; disconnect the sockets of the electric fans and the sleeves; open the filler cap and unscrew the coolant drainage cap located in the lower part of the radiator, collecting the liquid in a suitable container. Once the radiator has been freed from the sleeves and completely emptied, unscrew the fixing screws of the electric fans to the radiator itself, extract the latter and then the radiator from its seat after having freed it from the side brackets.


Posted on 30 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos