|
Do it yourself
| |||
| ||||
How to Change Engine Oil on Infiniti QX 80
Model: Infiniti QX80
Z62
- Years 2013-2024
In this video tutorial, you will see how to change the engine oil on an Infiniti QX 80 by following some simple steps: this procedure also applies to the Infiniti QX 56. The first thing to do is lift the hood and secure it with the prop rod. Unscrew the oil cap to check if the gasket is still in good condition. Lift the vehicle using a hydraulic jack and place safety jack stands under the vehicle. Position a container under the oil pan to collect the used oil. Using a 14 mm wrench, unscrew the oil drain plug and wait for all the oil to drain into the container (always remember to wear PPE while working for your safety). Screw the drain plug back in and using a 13 mm socket wrench, unscrew the 4 bolts of the splash shield. Place a container under the oil filter; using an oil filter wrench, unscrew the old oil filter and then replace it with the new one. Now lower the vehicle and using a funnel, refill with new oil (10W-30). Check with the dipstick until you reach an optimal level.
Updated on 10 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Infiniti QX80
(2013-2024 /
Z62)
To reset the engine oil light that appears on the instrument panel of your Infiniti QX80, you do not need to use any professional diagnostic tool. In…
Infiniti QX80
(2013-2024 /
Z62)
In this tutorial, you will see how to reset the oil service on the Infiniti QX80, a very simple operation to perform only after completing all schedu…
Infiniti QX80
(2013-2024 /
Z62)
There are two ways to reset the service light on the Infiniti QX80 after performing the maintenance. The first is undoubtedly the simplest: press the…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |