Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Iveco Daily

Model: IVECO Daily MK 5 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

When it is time to change the engine oil on the Iveco Daily, a light on the dashboard alerts you to the need for this maintenance operation. Once the oil change is done, you must reset the control system: to do this, sit in the driver's seat, turn on the ignition, press and hold the accelerator pedal, and pump the brake pedal seven times.

While still holding the accelerator pedal, wait for one minute, then release the pedal and turn off the ignition. Wait another minute and turn the ignition back on to check if the light has been reset.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Iveco Daily
How to reset the service light on the Iveco Daily
IVECO Daily (2014-2026 / MK 5) To reset the service light on the Iveco Daily, follow these steps: Turn on the Iveco Daily and ensure the service light is displayed on the dashboard…
How to Reset the Service Light on the Iveco Daily?
How to Reset the Service Light on the Iveco Daily?
IVECO Daily To reset the Service light on the Iveco Daily, press the accelerator pedal while the vehicle is completely off: while holding it down, turn the key i…
How to Reset the Service Light on an Iveco Daily?
How to Reset the Service Light on an Iveco Daily?
IVECO Daily Today, let's learn how to reset the oil change service light on an Iveco Daily by following the instructions below. First, get inside the vehicle and…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos