Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Car Roof Lining

Model: Jaguar Xj X300, MK 3 - Years 1994-1997
Part: Body

If you want to change the roof lining of your car and do it yourself without going to a body shop, it is possible. By following the steps in this guide, the operation can be carried out easily and without any difficulty. First, obtain a new covering. Once you have removed the various components such as the sun visors, handles, and pillar covers, the upper lining will easily come off by itself. Next, position the new sun visor correctly, ensuring it is secured by replacing the sun visors, handles, and pillar covers. These steps are exactly the same as those performed previously, so it will not be particularly difficult to put everything back in order.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Jaguar Xj (1994-1997 / X300, MK 3) Changing the oil and its filter is typical DIY maintenance, but it is essential to dispose of everything properly afterwards. Lift the vehicle on sui…
Replacing Your Car Remote Battery
Replacing Your Car Remote Battery
Jaguar Xj (1986-1994 / MK 4, XJ 40) Replacing the battery in your car remote is a very simple task. If there is an internal compartment in the remote, the battery replacement generally …
Replacing the Front Headlamp Bulb on a Jaguar XJ MK3
Replacing the Front Headlamp Bulb on a Jaguar XJ MK3
Jaguar Xj (2009-2019 / MK 9, X351) In today's video, you will see how to dismantle and replace the front headlamp bulb on a Jaguar XJ MK3. First, open the bonnet of your car and remove…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos