Do it yourself
Frequently asked questions about cars and motorcycles

How to solve the problem of wet footwell on Jaguar XK

Model: Jaguar Xk MK 2 - Years 2006-2014
Part: Body

Let's see how to solve the problem of the wet footwell in the Jaguar XK, caused by the obstruction of the infamous "duck bill". This is a slotted drain pipe that drains the condensation produced by the air conditioning system. This "bill" gets clogged with leaves, dirt, or simply gets stuck, due to its design, so the water, unable to flow out, flows back and leaks into the passenger's footwell, wetting the carpet. The most common and economical solution is to cut the bill, which is located in the engine compartment, on the passenger side, on the transmission tunnel. It is a black rubber tube that ends with a duck bill-shaped slot. With a cutter, simply cut off the end part, leaving the tube with a straight and free opening that cannot clog anymore. If the problem is not too severe, we can try closing all the air vents, setting the climate control to the minimum temperature and turning on the ventilation to the maximum for 5 minutes. The strong pressure "should" force open the clogged bill; the result is not guaranteed, but it costs nothing and can be tried. Otherwise, there is an original Jaguar replacement part with code C2P21646, which, to be replaced correctly, requires the removal of the entire dashboard (an extremely expensive operation).

Posted on 14 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Jaguar Xk (2006-2014 / MK 2) Originally, as proposed by the manufacturer, the pedals of cars can be quite narrow for the foot's resting position, and one might prefer to make a m…
Jaguar Xk (1996-2006 / MK 1) In this video tutorial, you will see how to dismantle and replace the small rear window on the second-generation Jaguar XK, R version. First, open th…
Jaguar Xk (1996-2006 / MK 1) If you want to locate the box that contains all the various fuses of your Jaguar XK, just pay attention to the following guide and follow the describ…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos