Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Jeep Wrangler?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

On the instrument panel of the Jeep Wrangler, it will be possible to make the Service light disappear by turning on the instrument panel, inserting the ignition key into the corresponding slot, and turning it clockwise: once the instrument panel has been turned on, you can proceed by pressing the accelerator pedal three times in a row until the end of the stroke. Once this operation has been performed, you can check that the Service light has completely disappeared from the instrument panel; when this operation is completed, you can turn off and turn on the instrument panel to verify that the reset has occurred.

Posted on 29 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2007-2018 / MK 3, JK) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…
Jeep Wrangler (2007-2018 / MK 3, JK) The procedure for resetting the Service light that appears on the instrument panel of the Jeep Wrangler can be done by inserting the ignition key int…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos