Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Jeep Wrangler?

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

On the instrument panel of the Jeep Wrangler, the Service light that is displayed can be reset by turning on the instrument panel, inserting the ignition key into the corresponding slot and turning it clockwise: once the instrument panel is activated, you can proceed by pressing the accelerator pedal three times in a row until it reaches the end of its travel. Once this operation is completed, you can verify that the Service light has disappeared from the instrument panel; when this operation is completed, you can turn off and turn on the instrument panel again.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to reset the service light on the 2020 Jeep Wrangler
How to reset the service light on the 2020 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) The 2020 Jeep Wrangler service light reset follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee, and can b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos