Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Door Panel for Window Regulator Repair

Model: Jeep Grand Cherokee ZJ, MK 1, ZG - Years: 1992, 1993, 1994, 1995, 1996, 1997, 1998
Part: Power window motor

See other generations:
Video tutorial

Clean the glove compartment. Unscrew the three screws located on the handle using a Torx key size 3. Remove the handle by sliding it off the opening knob.

Unscrew the screws securing the pillar cover and remove it. Around the panel, some screws are hidden under plastic caps that need to be removed using a non-metallic tool to avoid damaging the panel. Dismantle the speaker grille and the speaker.

Pull the panel to release all the plastic clips. Carefully slide the panel upwards to disengage other clips.

Disconnect the speaker wires. Gently peel off the protective film using a blade, trying not to damage the sealing adhesive.

You now have access to the internal components.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Window Regulator Repair with Repair Kit
Window Regulator Repair with Repair Kit
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The first operation is to remove the door panel: unscrew the various fixing screws and, using a flathead screwdriver, pry along the edges to release …
How to Repair the Window Regulator on a Jeep Grand Cherokee
How to Repair the Window Regulator on a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) If you need to replace the window regulator mechanism on your vehicle, specifically the frame and electric motor, follow the instructions below. Firs…
Repairing the Window Regulator Motor
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) Clear the glove compartment. Unscrew the three screws on the handle using a Torx key size 3. Remove the handle by sliding it off the opening knob. Un…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos