Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Start & Stop System Works in the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Starter motor

In this video, you will see how the start & stop system works in the Jeep Renegade with automatic transmission. By default, the start & stop system is active at every start and can be deactivated, if desired, using the button at the base of the gearbox. The system will not operate immediately but will activate once the engine reaches the correct operating temperature. Each time you stop for more than 3 seconds, the car will automatically turn off (if you have a manual gearbox, this will only happen if the car is in neutral), and it will restart with a simple press of the accelerator. It is advisable to deactivate it when driving in heavy traffic to avoid overloading the starter motor and battery.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How can I deactivate the start and stop on my Jeep Renegade?
How can I deactivate the start and stop on my Jeep Renegade?
Jeep Renegade (2014-2021 / ) On your Jeep Renegade, the start & stop system is active by default at every start and must be manually deactivated if desired, using the specific bu…
How to Reset the Service Light on the Jeep Renegade
How to Reset the Service Light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To perform the service reset on the Jeep Renegade, follow these steps: press the start button once without starting the engine, just turning on the i…
How to Remove the Third Brake Light on a Jeep Renegade
How to Remove the Third Brake Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this guide, follow the instructions to remove the third brake light on the Jeep Renegade in simple steps. First, open the boot and get a 10 mm spa…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos