Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on the Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Service warning light

If you have just changed the engine oil on your 2012 Jeep Wrangler but continue to see the warning light illuminated, do not worry as you just need to perform a simple reset to resolve the issue. First, insert the key and start the dashboard (do not start the engine). Next, press the accelerator pedal fully three times in quick succession. Immediately after the third time, hold the pedal down until you hear a beep. At that point, release the pedal, and the reset is successfully completed. If there are errors, turn off the dashboard and start the procedure again.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Wrangler (2018-2026 / JL, MK 4) If you want to find out how to manually reset the engine oil light on your new Jeep Wrangler (year 2025), all you have to do is read the following st…
Jeep Wrangler (2007-2018 / MK 3, JK) To manually reset the oil light on your Jeep Wrangler Mk3 (2007-2018), simply follow the instructions in this mini guide. First, turn on the instrume…
Jeep Wrangler (2007-2018 / MK 3, JK) To manually and independently reset the engine oil light on your Jeep Wrangler Mk3, follow these simple steps in this mini guide. First, enter the ca…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos