Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Jeep Compass, follow these simple steps. Before resetting, perform the service operations, which include changing the oil and oil filter, replacing the cabin air filter, and checking the belt and engine.

To change the oil, lift the vehicle and use a spanner to open the oil sump, allowing the oil to drain before closing the plug. Lower the car and remove the nut securing the filter.

Once the filter is replaced, you can top up the oil. To replace the cabin air filter, remove the glove compartment and take out the old filter to insert a new one. To reset the light, turn on the ignition and connect the vehicle to the diagnostic computer.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…
How to Reset the Service Light on a 2018 Jeep Compass
How to Reset the Service Light on a 2018 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a 2018 Jeep Compass, first turn on the ignition and then press the settings button to open the vehicle menu. From the m…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos