Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

The Service light that appears on the instrument panel of the Jeep Wrangler can be reset by turning on the ignition, inserting the key into the ignition switch, and turning it clockwise. Once the instrument panel is on, press the accelerator pedal all the way down three times in a row. After completing this operation, you can check that the Service light has disappeared from the instrument panel; once this is done, you can turn off and then turn on the instrument panel again.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…
How to Reset the Service Light on a 2020 Jeep Wrangler
How to Reset the Service Light on a 2020 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Resetting the service light on the 2020 Jeep Wrangler follows a very simple procedure, similar to the reset of the service light on the Jeep Cherokee…
How do you reset the Service light on the Jeep Wrangler?
How do you reset the Service light on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) The procedure for resetting the Service light that appears on the instrument panel of the Jeep Wrangler can be done by inserting the ignition key int…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos