Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the Start&Stop system of the Kia Rio

Model: Kia Rio YB, MK 4, SC - Years 2016-2023
Part: Onboard computer

Disabling the start & stop system of the 2017 Kia Rio is a very simple and quick operation to perform. To deactivate the system, we should start the vehicle's engine and before hitting the road, press the button with the vehicle symbol located behind the steering wheel on the left side of the dashboard. If during the drive we decide to reactivate the system, we should simply press the button. The start & stop system was introduced on vehicles with the sole purpose of reducing fuel emissions during vehicle stops, although it is currently reported as a problem for the battery by drivers.

Posted on 6 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Deactivate the Passenger Airbag on a Kia Rio?
How to Deactivate the Passenger Airbag on a Kia Rio?
Kia Rio (2011-2017 / UB, MK 3) To deactivate the front passenger airbag on a Kia Rio, open the front passenger door to locate the switch on the right side of the dashboard. Insert …
How to deactivate the passenger airbag in the KIA Rio?
How to deactivate the passenger airbag in the KIA Rio?
Kia Rio (2016-2023 / YB, MK 4, SC) In this tutorial, we can see how to deactivate the passenger airbag in the KIA Rio, an extremely simple and quick operation, to be carried out necess…
How to Fold Down the Rear Seats of a Kia Rio
How to Fold Down the Rear Seats of a Kia Rio
Kia Rio (2011-2017 / UB, MK 3) Before you can start, open the rear doors of your Kia Rio. Then, enter the cabin. This will allow you to reach the clips that hold the rear seats in …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos