Do it yourself
Frequently asked questions about cars and motorcycles

How to Install an Android Radio in a Kia Rio MK3

Model: Kia Rio UB, MK 3 - Years 2011-2017
Part: Car stereo

Here’s how to install an Android radio in a Kia Rio MK3: we recommend the radio and the fascia from the video available on lionzdealz.com for £265.41, with free shipping. Now, let’s proceed: start by prying off and removing the plastic frame surrounding the radio. Disconnect the electrical connectors, such as the one for the passenger airbag light. There are 4 screws holding the original unit in place: unscrew all four, pull out the old radio and disconnect the power cable, antenna, and connectors. Now connect all the cables to the new unit. The procedure also includes programming the steering wheel controls, teaching the radio the buttons (volume, station change, mute). Assemble the new custom fascia, which usually includes the air vents and glove compartment. Position the GPS cable, then turn on and configure: connect the Wi-Fi to your phone, set the startup logo to "Kia" and adjust the time zone.

Posted on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Kia Rio (2011-2017 / UB, MK 3) Below is the guide necessary to remove and replace the standard car radio in the Kia Rio. First, get inside the vehicle and start by removing the pla…
Kia Rio (2011-2017 / UB, MK 3) Turning on and off the radio of the Kia Rio model mk3 in case of necessity is a very simple operation that requires the use of only one step and a fe…
Kia Rio (2011-2017 / UB, MK 3) Storing radio channels on a Kia Rio model 3 is a simple and quick operation that will take just a few minutes of your time. Get inside the vehicle an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos