Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lancia
    3. :
  3. Delta
    4. : Removal of front headlights and bumpers on Lancia Delta 3

Lancia Delta - Video tutorial

Model: Lancia Delta MK 3 - Years 2008-2014
Part: Headlight
Operation: Removal of front headlights and bumpers on Lancia Delta 3

In this video tutorial we will see how to remove the headlights and the bumper on a Lancia Delta third series. First of all, we go to unscrew all the fixing screws that we find on both sides of the wheel arches, in order to start unhooking the bumper from the side parts; after which we unscrew the screws that we find under the front bumper, as shown in the video. At this point we open the bonnet and unscrew the additional torx screws of the bumper and the screws of the front lights; we just have to remove the bumper and disconnect the electrical connectors of the lights to remove them too!


Posted on 14 January 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Delta 2008-2014 - What bulbs does the Lancia Delta mount? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos