Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the steering wheel airbag from a Lancia Lybra?

Model: Lancia Lybra MK 1 - Years 1998-2005
Part: Airbag

To remove the steering wheel airbag from a Lancia Lybra, rotate the steering wheel to gain access to the bolts located at the rear on both sides. This will allow you to loosen the bolts by pulling them from their housing. Once the bolts are removed, detach the airbag from the front of the steering wheel by disconnecting the connector at the rear. After the old airbag has been removed, replace it with a new spare part, which should be connected to the connector and secured with the appropriate screws.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Lancia Lybra?
How to Remove the Door Panel of the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) To remove the door panel of the Lancia Lybra, first detach the trim located at the top of the panel, at the base of the window. Next, loosen the scre…
Where are the fuses located in the Lancia Lybra?
Where are the fuses located in the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) The fuses of the Lancia Lybra are contained within two fuse boxes installed in the vehicle: in this model, you can find two boxes. The first is locat…
How to Replace the Number Plate Bulb on a Lancia Lybra
How to Replace the Number Plate Bulb on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) To replace the number plate bulb on a Lancia Lybra, loosen the two screws located at the top and bottom of the light unit, positioned on the left sid…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos