|
Do it yourself
| |||
| ||||
How to Service the Lancia Ypsilon
Model: Lancia Ypsilon
846, Ypsilon 3, Y3, MK 3
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
In this video tutorial, see how to service the Lancia Ypsilon. Lift the car's bonnet and use a hydraulic jack to raise the vehicle, also placing safety stands. At this point, raise the oil dipstick and unscrew the engine oil cap (to ensure better oil drainage). Now go underneath the vehicle and unscrew the drain plug using a 12mm hex key; it is located next to the exhaust. Place a container under the drain plug and unscrew it; once the plug is removed, wait for all the oil to drain into the container. Next, to drain all the oil, lower the vehicle. Once this operation is complete, raise the vehicle again and replace the plug. At this point, also replace the oil filter.
Updated on 25 June 2026 by ScegliAuto
Related tutorials
Lancia Ypsilon
(2003-2011 /
Y2, MK 2, 843, Ypsilon 2)
An extremely simple solution to clear the Service light on a 2004 Lancia Ypsilon. This reminder alerts the owner that regular maintenance is due, as …
Lancia Ypsilon
(2003-2011 /
Y2, MK 2, 843, Ypsilon 2)
How to remove the original car radio on a Lancia Ypsilon? Follow this guide carefully: to remove the radio from your Ypsilon, you do not need plastic…
Lancia Ypsilon
(2011-2023 /
846, Ypsilon 3, Y3, MK 3)
In this video tutorial, you will learn how to reset the tyre pressure light on a third series Lancia Ypsilon in simple steps; before performing the r…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.127
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |