Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install an Additional Multijet Control Unit on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Control unit

Here’s how to install an additional control unit on a Lancia Ypsilon Multijet: this will increase performance and reduce consumption. Disconnect the common rail pressure sensor connector; now connect the disconnected connector to the input signal of the control unit. The male connector of the additional control unit should be reconnected to the common rail pressure sensor. Open the control unit and check the correct position of the jumpers (power from 1 to 10 and presence of the DPF). Now turn on the ignition without starting the engine, and wait for the LED to stop flashing. Then start the engine and check that no warning lights are illuminated on the dashboard. At this point, you can place the additional control unit in the engine bay in a stable and secure position. You can find the control unit on Amazon for £149.00, including delivery, with code B07VRMP68S.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Filter in the Lancia Ypsilon 1.3 MultiJet?
How to Replace the Oil Filter in the Lancia Ypsilon 1.3 MultiJet?
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) In this video, you can see how to replace the oil filter in the Lancia Ypsilon 1.3 MultiJet; this procedure applies to any car equipped with this eng…
How to Fit a Rear Bumper on a Lancia Ypsilon
How to Fit a Rear Bumper on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) How do you fit a rear bumper on a Lancia Ypsilon? Let's see how to proceed; it's not too complex if done methodically. First, grab the bumper and pos…
Fitting Parking Sensors on Our Lancia Ypsilon
Lancia Ypsilon (2011-2023 / MK 3, Y3, Ypsilon 3, 846) Want to fit parking sensors on your Lancia Ypsilon? Follow this guide to install the parking sensors effectively. First, take measurements with a tap…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos