Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to operate the windshield washer system of the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Checks and maintenance

In this short and simple guide we will see how to operate the windshield washer system, by activating the pump, on the Land Rover Evoque. First of all, we get on board the vehicle and start the instrument panel or directly the engine; then we use the central control of the right lever to activate the windshield washer pump, moving it to the rear to also activate the rear windshield washer pump, as shown in the video. For the correct use of the windshield washer system, it is necessary that the fluid is always present inside the appropriate tank located in the engine compartment!

Posted on 21 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Turbocharger on a Land Rover Evoque 2.2?
How to Remove the Turbocharger on a Land Rover Evoque 2.2?
Land Rover Evoque (2011-2018 / L538, MK 1) In this tutorial video, you will learn how to remove the turbocharger on a Land Rover Evoque 2.2 by following the instructions below. First, open the…
How to replace the windshield wiper of the Range Rover Evoque
How to replace the windshield wiper of the Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In the following guide addressed to all of you who own a first-generation Range Rover Evoque, we will discover how to properly replace the windshield…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

    Frequently Asked Questions

    • Evoque 2011-2018 - What does “SOS limited functionality” mean in the Range Rover Evoque? Read answer

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos