Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to program the electronic key of the Land Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Key

Below we will see the instructions that will allow us to program the electronic key of the Land Rover Evoque. In order to carry out this operation, it is necessary to use a specific programming software (in this case the Autel IM608); we connect to the OBD port to communicate with the engine control unit. At this point, we bring the key to be programmed close and follow the procedure indicated by the tool to perform the programming; we then verify the operation of the new key, disconnecting the tool, following the video tutorial to the end!

Posted on 6 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key for the Land Rover Evoque?
How do you program the key for the Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To program the key of the Land Rover Evoque, you will need to insert the ignition key into the key block: once this has been inserted and the key has…
Replacing the Key Fob Battery for Land Rover Range Rover Evoque
Replacing the Key Fob Battery for Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will see how to disassemble and replace the battery of the key fob for a Land Rover Range Rover Sport, as well as the standard Ran…
How to replace the gear knob of the Land Rover Evoque
How to replace the gear knob of the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Replacing the gear knob in your first series Land Rover Evoque is really simple. To complete the operation in a few minutes, just read the following …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos