Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to replace the cabin air filter on Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Cabin air filter
Operation: How to replace the cabin air filter on Freelander

How to remove the pollen filter on Land Rover Freelander. The cabin filter is found at the bottom right of the glove box. With a plastic lever we peel off the coating placed in the lower left part of the dashboard, get a screwdriver or a cordless drill, remove the filter holder cap, then, extract the worn cabin filter. We insert a new passenger compartment filter, making it adhere well around the walls of the box, replace the filter box cap and tighten the screws. We check the correct assembly of the previously assembled pieces.


Posted on 8 November 2023 by ScegliAuto



How to replace the cabin air filter on Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Although the position in which the cabin air filter of your Land Rover Freelander 2 is located is not among the easiest and most comfortable to reach
Replacement of the cabin air filter of the Land Rover Freelander 1
Land Rover Freelander (1997-2006 / Freelander 1) To prevent foreign bodies from entering the ventilation system of the Land Rover Freelander 1, there is a filter mounted on the intake that must be p
How do you replace the cabin filter on Land Rover Freelander 2?
Land Rover Freelander (2006-2016 / Freelander 2) To be able to replace the cabin filter of the Land Rover Freelander 2 you have to go and open the glove box located on the passenger side. Once the d

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos