Do it yourself
| ||||
|
Land Rover Discovery - Video tutorial
Model: Land Rover Discovery
L462, MK 5, Discovery 5
- Years 2017-2023 In this video tutorial we can see how the service reset is performed on Land Rover Discovery. The first thing to do will be to perform maintenance such as changing the engine oil and filters; subsequently, after performing the do-it-yourself service, you have to open the bonnet, then get into the car and put the handbrake; press the START button once to turn on the ignition, without placing your foot on the brake pedal; at this point you must open the driver's side door and keep the accelerator and brake pedals pressed together; wait a few seconds and you will see that the service has started, after a few seconds, take your feet off the pedals, turn off the car and close the door and after a few moments turn on again to check that the warning light has gone out.
Posted on 20 May 2024 by ScegliAuto
Service reset on a Land Rover Discovery.
Land Rover Discovery (2017-2023 / L462, MK 5, Discovery 5) In this tutorial, we are shown how to perform a service reset, which is the reset of the maintenance indicator for the remaining life of the engine o
How to reset the service in the Land Rover Discovery?
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this tutorial we can see how to reset the service in the Land Rover Discovery 4. Before proceeding with this simple operation, we must obviously h
How to perform a service reset on a Land Rover Discovery 4
Land Rover Discovery (2010-2016 / Discovery 4, MK 4, LR4) In this video tutorial we can see how it is possible to reset the service in a Land Rover Discovery 4, following a few simple steps: the first thing Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.041
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |