Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : How to remove the rear lights in the Land Rover Range Rover?

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 3, L322 - Years 2002-2012
Part: Tail light
Operation: How to remove the rear lights in the Land Rover Range Rover?

In this tutorial we can see how to disassemble the rear lights in the Land Rover Range Rover L322, so that you can for example replace a faulty bulb. First of all, let's make sure that the key is not inserted in order to operate safely, then open the rear door and unscrew the two fixing screws with a 10mm socket wrench. Once this is done, we identify the two indicated slots, insert a flat-tipped screwdriver inside them and, by levering, release the headlight from the bodywork. At this point we can proceed with the replacement of the damaged element.


Posted on 3 July 2022 by ScegliAuto



How to remove the rear lights in the Land Rover Range Rover Sport?
Land Rover Range Rover (2012-2021 / MK 2) .. In this tutorial we can see how to remove the rear lights in the Land Rover Range Rover Sport, a very simple and fast operation...
How to disassemble the tailgate panel in the Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) As we can see in this tutorial, removing the tailgate panel in the Land Rover Range Rover L405 is an extremely simple and quick operation. First of a
How do you replace the seat belt of the Land Rover Range Rover?
Land Rover Range Rover (2012-2021 / MK 2) In order to remove the seatbelt of the Land Rover Range Rover, you first need to lever the plastic trims located at the bottom of the seatbelt reel.

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos