![]() |
Do it yourself
| |||
|
Land Rover Evoque - Video tutorial
Model: Land Rover Evoque
MK 2, L551
- Years 2018-2024 In this video we see how to put the parking brake of the Range Rover Evoque in maintenance mode and - above all - how to remove it from maintenance mode at the end. We turn on the dashboard and then turn on the parking brake ignition switch, pressing the button for two seconds. We turn off and turn on the ignition button again, still holding down the button, and press the brake pedal. In this way, the brake is in maintenance mode, because the dial says "service required". Turn off the dashboard and work on the brakes, change the pads or do what you need to do: to exit this mode, we will do the opposite. We turn on the dashboard, pull the parking brake switch for two seconds. We turn off and turn on the dashboard again, always pulling the parking brake switch and pressing the brake pedal. When the "maintenance required" message disappears from the screen, you can release the button and the pedal, and you can start driving again.
Posted on 14 June 2023 by ScegliAuto
![]() Land Rover Evoque (2011-2018 / MK 1, L538) How to change the rear brake pads on a Range Rover Evoque? We see. We lift the car on a column bridge up to the desired height, immediately after we ![]() Land Rover Evoque (2018-2024 / MK 2, L551) The procedure to correctly reset the service light on your second-generation Range Rover Evoque (2020 model) is very simple and you just need to foll ![]() Land Rover Evoque (2011-2018 / MK 1, L538) In today's video we will see how to reset the service expired message in the Land Rover Range Rover Evoque. First, we recommend carrying out regular Other guides that may interest you |
Frequently Asked QuestionsHow to activate the cruise control of the Nissan Qashqai![]() Let's see how the cruise control is activated on the Nissan Qashqai: you have to activate it by putting the cruise control switch to "on", then, using only the right spoke of the steering wheel, press the "set-" button, then the "res +" button also on the right spoke of the steering wheel and the cruise control indicator lights up on the car's instrument panel display. If the brake pedal is pressed while the cruise control is in operation or if the "cancel" button on the right spoke of the steering wheel is pressed, the cruise control will automatically deactivate and the cruise control indicator on the instrument panel will go out. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |