Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How do you replace the timing belt of the Land Rover Freelander?

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 2 - Years 2006-2016
Part: Timing belt
Operation: How do you replace the timing belt of the Land Rover Freelander?

In order to replace the timing belt of the Land Rover Freelander, you need to lift the vehicle using a jack, so that the right front wheel and its fender can be removed. Once these components have been removed, it will be possible to loosen the central nut of the belt tensioner pulley, moving it from its housing: this will allow the belt to reduce its tension. In this way, the old belt will be removed from its housing and it will be possible to install the new one, reinstalling the pulley and all the other components previously removed.


Posted on 30 October 2023 by ScegliAuto

    Frequently Asked Questions

    • Freelander 2006-2016 - How much does it cost to replace the Land Rover Freelander timing belt? Read Answer
    • Freelander 2006-2016 - How much does it cost to replace the Land Rover Freelander timing belt? Read Answer
    • Freelander 2006-2016 - How much does it cost to replace the Land Rover Free Lander 2 timing belt? Read Answer
    • Freelander 2006-2016 - Does the Land Rover Freelander 2 have a chain or timing belt installed? Read Answer
    • Freelander 1997-2006 - After how many km to replace the Land Rove Freelander timing belt? Read Answer
    • Freelander 1997-2006 - How many km does the Land Rover Freelander 2006 timing belt need to be replaced? Read Answer
    • Freelander 2006-2016 - How many km do you change the Land Rover Freelander 2 timing belt? Read Answer
    • Freelander 1997-2006 - How much does it cost to replace the Land Rover Freelander 2.2 timing belt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos