Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Timing Belt on a Land Rover Freelander

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Timing belt

How to remove and replace the timing belt on a Land Rover Freelander: Lift the car on a column lift and remove the right front wheel. Then, use a screwdriver to remove the right wheel arch liner (remove the plastic rivets or screws). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to unscrew the tensioner pulley securing bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, reinstall the wheel arch liner and the wheel with the tyre on the vehicle.

Updated on 1 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Freelander (2006-2016 / Freelander 2) In this video tutorial, you will see the main instructions useful for removing and replacing the timing belt on the Land Rover Freelander. First, ope…
Land Rover Freelander (1997-2006 / Freelander 1) Prepare to replace the timing belt on a Land Rover Freelander: lift the bonnet, remove the engine soundproofing panel and the timing belt cover. Usin…
Land Rover Freelander (2006-2016 / Freelander 2) In this video, we will show you when to change the timing belt on a Land Rover Freelander 2. As seen in the video, the timing belt should be replaced…

Other guides you may be interested in

    Frequently Asked Questions

    • Freelander 2006-2016 - Does the Land Rover Freelander 2 have a chain or timing belt installed? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos