Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Placement of the fuse boxes of the Land Rover Range Rover

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover MK 2 - Years 2012-2021
Part: Fuse box
Operation: Placement of the fuse boxes of the Land Rover Range Rover

Let's see where the three fuse boxes are located on the Land Rover Range Rover. The first box can be found behind the glove compartment in front of the front passenger. To access it, open the compartment, release and rotate it downwards, and behind it you will find the fuse box. The second box is located in the engine compartment on the passenger side, near the windshield, protected by a plastic cover closed by two clips. The third box is located in the trunk, also on the passenger side behind a panel on the wheel arch. To quickly find the fuse of our interest, consult the specific attached diagram.


Posted on 21 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Range Rover 2012-2021 - Where are the fuses of the Land Rover Range Rover Sport located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos