Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure warning light on the Lexus ES.

Model: Lexus ES , Xv40 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

These simple steps will show us how to reset the tire pressure warning light (TPMS) of the Lexus ES; before resetting the warning, it is necessary for all four tires to be at the correct pressure. Then, we get into the car and start the ignition; after that, we press and hold the reset button located at the bottom on the driver's side (above the pedals), until the warning light on the dashboard is completely reset, as shown in the video.

Finally, we turn off the ignition and start the engine!


Posted on 25 April 2025 by ScegliAuto


Related tutorials

How to reset the tire pressure light on the Lexus ES
How to reset the tire pressure light on the Lexus ES
Lexus ES (2006-2012 / , Xv40) The following steps will show us how to reset the tire pressure warning light (TPMS) on the Lexus ES; before resetting the TPMS sensors, it is necess…
How to Reset the Tyre Pressure Warning Light on a Lexus ES350?
How to Reset the Tyre Pressure Warning Light on a Lexus ES350?
Lexus ES (2006-2012 / , Xv40) To reset the tyre pressure warning light on a Lexus ES350, first inflate the tyres to the recommended pressure value: this value is indicated on the …
How to Reset the Tyre Warning Light on a Lexus ES 300h
How to Reset the Tyre Warning Light on a Lexus ES 300h
Lexus ES (2019-2025 / Xz10) In this tutorial, you will see how to reset the tyre warning light on a Lexus ES 300h, a very simple and quick operation to perform only after restor…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos