Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Mkx
    4. : How to perform a service reset on Lincoln Mkx

Lincoln Mkx - Video tutorial

Model: Lincoln Mkx MK 2 - Years 2016-2018
Part: -board computer
Operation: How to perform a service reset on Lincoln Mkx

In this video tutorial we can see how to reset the maintenance light on Lincoln Mkx. The first thing to do is to change the engine oil and filters. After performing the do-it-yourself service, get in your car and put the handbrake on; insert the key and turn on the ignition; now press and hold the button on the left of the steering wheel to enter the settings MENU, select "Settings" and press Ok then "Vheicle" and press Ok then "Maintenance" and select "Oil Life"; now hold the Ok key to perform the reset. Now turn the engine off and on again to verify the correct reset.


Posted on 19 May 2024 by ScegliAuto



How to reset the oil service in the Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) Resetting the oil service in the Lincoln MKX is a very simple and fast operation, let's see how to proceed in this tutorial. Before doing this, of co
How to reset the oil light on the 2018 Lincoln MKX?
Lincoln Mkx (2016-2018 / MK 2) Not everyone knows that to reset the oil light that comes on in your car's dashboard, you don't necessarily need a professional's intervention, and t
How do I replace the headlight bulb on the Lincoln MKX?
Lincoln Mkx (2007-2015 / MK 1) In order to replace the Lincoln MKX headlight bulb, you need to open the hood, so that you can access the rear part of the corresponding headlight. H

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos