Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Mahindra Maxximo?

Model: Mahindra Maxximo MK 1 - Years 2010-2015
Part: Engine oil

To change the oil in the vehicle, follow these steps: open the hood and lift the vehicle, unscrew the oil fill cap and locate the drain plug next to the oil pan. Unscrew the drain plug while positioning a container to collect the used oil. Wait until all the oil has drained out and screw the plug back in. Then, locate the oil filter and unscrew it using the specific wrench. Take the new filter and install it, replacing the O-ring gasket. Go back to the engine compartment and top off with new oil, and finally check the level with the dipstick and close the fill cap.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Differential Transmission Oil in the Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) Today, we will see in this video tutorial how to change the differential transmission oil in the Mahindra Maxximo in simple and quick steps. First, p…
How to Change the Engine Oil on the Mahindra Maxximo
How to Change the Engine Oil on the Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) If you plan to change the engine oil and filter on this vehicle model, it will be helpful to watch this video and read the instructions provided belo…
How to Renew the Body of Your Mahindra Maxximo
How to Renew the Body of Your Mahindra Maxximo
Mahindra Maxximo (2010-2015 / MK 1) As shown in the video, the Mahindra Maxximo van or microvan can wear down over time, with paint peeling and rust forming. To restore it to like new c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos