Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Maruti
    3. :
  3. Alto
    4. : 2012-2019 (AOD)

Maruti Alto Years 2012-2019 (AOD)

Maruti Alto (2012-2019 / AOD)
How to remove the car stereo of Maruti Alto 800.
Today we will see, in this short and simple guide, how to disassemble and replace the factory car radio of the Maruti Alto 800. First, we get into the car and …read all…
Posted on 29 June 2023 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to remove the bumper of the Maruti Alto 800.
If we want to proceed with removing the front bumper on this car model, in the description below we will find the necessary information and the various steps …read all…
Posted on 14 April 2023 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to replace the front wipers of Maruti Alto.
Today in this video tutorial, we will see how to disassemble and replace the front windshield wipers of the Maruti Alto in simple steps. First, let's move to …read all…
Posted on 1 April 2023 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
Changing the engine oil and oil filter of the Maruti Alto
Today we see in this guide the step-by-step instructions to be able to carry out the routine maintenance coupon, replacing the engine oil and the oil filter, …read all…
Posted on 24 May 2023 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to replace the air filter on the Maruti Alto 800
If we intend to replace the air filter on this car in DIY mode, we can refer to the video images and the description below. Once the bonnet has been opened, …read all…
Posted on 19 April 2023 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to replace the remote control battery of a Maruti key
To replace the remote control battery of a Maruti Alto car key, you will only need a small flat-blade screwdriver and the new battery. The battery model …read all…
Posted on 3 October 2022 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to replace the rear bulbs in the Maruti Alto LX?
Replacing the rear light bulbs in the Maruti Alto LX, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, make sure …read all…
Posted on 8 July 2022 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to replace the Maruti Alto key battery
If the key of your Maruti Alto has suddenly stopped working, most likely you have to replace the battery inside it. If you don't know how to do it, read the …read all…
Posted on 20 May 2022 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to replace the front fog lights of the Maruti Alto?
If it is our intention to customize the car by mounting front fog lights on the car (after market purchase), it is necessary to proceed as follows: obtain a 10 …read all…
Posted on 5 May 2024 by ScegliAuto
Maruti Alto (2012-2019 / AOD)
How to reset the Maruti Alto ECU
The control unit is one of the most important components among those present inside your car. In case of errors or malfunctions it is possible to solve them …read all…
Posted on 27 April 2024 by ScegliAuto
Car stereo (1) Bodywork (1) Control unit (1) Wheel rim (1) Key (2) Timing belt (1) Dashboard (1) Headlight (1) Tail light (1) Fog lights (1) Air filter (1) Cabin air filter (1) Petrol filter (1) Side turn signal light bulb (1) Headlight bulb (1) Rear light bulb (1) Engine oil (2) Outside rearview mirror (1) Windscreen wipers (1)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos