Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for Maruti Ertiga

Model: Maruti Ertiga MK 1 - Years 2012-2018
Part: Engine oil

Follow these instructions to perform routine maintenance by replacing the engine oil and oil filter on your Maruti Ertiga. First, lift the vehicle and remove the oil drain plug located on the oil pan using a T45 Torx wrench, allowing the oil to drain into a container for about ten minutes. Next, remove the oil filter cartridge found in the engine compartment using a 27 mm socket wrench with an extension. Finally, open the fill cap and top off with new oil (in this case, a 5W30).

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Set the Time on a Maruti Ertiga
How to Manually Set the Time on a Maruti Ertiga
Maruti Ertiga (2012-2018 / MK 1) If the instrument cluster of your first-generation Maruti Ertiga (2012-2018) displays an incorrect time and you want to change it manually, follow th…
How to Reset the Airbag Light on a Maruti Ertiga?
How to Reset the Airbag Light on a Maruti Ertiga?
Maruti Ertiga (2012-2018 / MK 1) To reset the airbag light on a Maruti Ertiga, first check for any damage to the appropriate fuses or the wires connected to the various sensors. If t…
How to Replace the Air Filter on a Maruti Ertiga Mk2
How to Replace the Air Filter on a Maruti Ertiga Mk2
Maruti Ertiga (2018-2025 / MK 2) If you own a Maruti Ertiga Mk2 and want to replace the engine air filter to maintain performance and reliability, follow this guide. First, turn off …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos