Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil on a Maruti 800

Model: Maruti 800 MK 1 - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Engine oil

Video tutorial

To replace the engine oil and the oil filter on the vehicle, follow these steps: First, open the hood and lift the vehicle. Unscrew the oil fill cap. On this vehicle, you also need to remove the front bumper, and before doing this, you must remove the front turn signals.

Locate the oil drain plug at the front and unscrew it, but not before positioning a container to collect the used oil. Find the location of the oil filter and use a socket wrench to remove it. Replace the filter cartridge, reposition it on the cap, and screw it back in. Meanwhile, screw the oil drain plug back in and proceed to refill with new oil from the engine compartment.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Maruti 800?
Where are the fuses located in the Maruti 800?
Maruti 800 (1984-2014 / MK 1) The fuses in the Maruti 800 are located inside the fuse box installed in the vehicle: it is situated in the cabin, on the lower left side of the dash…
How to Remove the Seats from the Maruti 800
How to Remove the Seats from the Maruti 800
Maruti 800 (1984-2014 / MK 1) In this guide, you will find the main instructions that will allow you to remove and replace the seats in the Maruti 800 by following these simple st…
How to Replace the Headlights of the Maruti 800
Maruti 800 (1984-2014 / MK 1) Discover the main instructions for removing and replacing the headlights of the Maruti 800 in this guide. First, open the hood of your car and start …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos