Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Mazda key

Model: Mazda 2 MK 2, DH, DE - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

The key fob on Mazda vehicles is very similar for all models from the same manufacturer, which means that replacing the key fob battery follows the same procedure. To replace the key fob battery, we need to insert a Phillips screwdriver inside the key and open the key fob to remove the non-working battery.

Insert a new battery in its place and then close the key fob. Go near the vehicle to test its functionality, otherwise it will be necessary to reprogram the key.


Posted on 8 February 2025 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Mazda 2
How to Replace the Key Battery on a Mazda 2
Mazda 2 (2007-2014 / MK 2, DH, DE) Start by pressing and holding the button on the back of the key fob for your Mazda 2, then extract the physical emergency key. Next, using a thin but…
How to replace the battery of the Mazda 2 car remote control
How to replace the battery of the Mazda 2 car remote control
Mazda 2 (2007-2014 / MK 2, DH, DE) Today we will see how to replace the battery of the remote control of a Mazda 2 vehicle. To perform the replacement, we need to get a CR 16 20 model …
How to Replace the Remote Key Battery of a Mazda 2?
How to Replace the Remote Key Battery of a Mazda 2?
Mazda 2 (2007-2014 / MK 2, DH, DE) To replace the battery of the Mazda 2 key, press the button to lift the key and use a thin, rigid object to unclip a fastening clip located in the ke…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos