Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Mazda CX 9

Model: Mazda Cx 9 TB - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

See other generations:
Video tutorial

In this new mini guide, we will explain step by step how you can complete the replacement of the front headlight bulb of your Mazda CX 9 first edition. First of all, make sure you have purchased a perfectly compatible new bulb.

Then turn off the car and lift the front hood, then remove the dust cap located in the back of the headlight. Once the cap is removed, unscrew the bulb holder by rotating it to the left and then proceed with replacing the faulty bulb with the new one. Finally, reassemble everything correctly and you are done.


Posted on 16 June 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Mazda CX-9?
How to Replace the Front Brake Pads on a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) To replace the front brake pads on a Mazda CX-9, lift the vehicle with a jack or lift so that the corresponding wheel is off the ground. Once the whe…
How to Replace the License Plate Light Bulbs on a Mazda CX-9?
How to Replace the License Plate Light Bulbs on a Mazda CX-9?
Mazda Cx 9 (2007-2015 / TB) In this tutorial, you will see how to replace the license plate light bulbs on a Mazda CX-9, a very simple and quick operation. First, make sure the …
Replace the Front Brake Rotors and Pads on the Mazda CX-9
Replace the Front Brake Rotors and Pads on the Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) Today, you will learn how to remove and replace the front brake pads on the Mazda CX-9 by following these simple steps. First, raise the vehicle and …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos