Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing AUX IN Adapter

Model: Mazda 3 BK, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Accessory kit

See other generations:
Video tutorial

Open the glove compartment and, using a small flat screwdriver, detach the central trim of the dashboard; then unscrew the two fixing screws of the air vents and the radio located at the sides of the central display: while slightly lifting the vents, pull the radio from its housing by disconnecting the smaller connector (the one near the antenna with the orange jack), into which you will insert the AUX output wiring.

Then, test the functionality by connecting your iPhone and continue by removing the cover around the gear lever and the ashtray (it is all clipped) to pass the cable and position the AUX output.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Installation of the Front Headlamp Bulb
Installation of the Front Headlamp Bulb
Mazda 3 (2003-2009 / BK, MK 1) Installing the front headlamp bulb is a fairly simple task. Remove the bolt at the front of the front wing, disconnect the headlamp connector, and pu…
How to Update the Onboard Computer of the Mazda 3
How to Update the Onboard Computer of the Mazda 3
Mazda 3 (2019-2026 / MK 4, BP) Updating the software of the onboard computer in the Mazda 3 is necessary to continue using all the functions provided by the device. The installatio…
Installation of LED Front Headlights
Installation of LED Front Headlights
Mazda 3 (2009-2013 / BL, MK 2) Replacing the bulbs in the front headlights with LED ones is a good solution as these lamps not only give the vehicle a more modern and appealing loo…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos