Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the key of the Mercedes E-Class W212 2011

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Key

In the following guide, we will explain the steps you need to follow in order to complete the replacement of the battery located inside the key of your Mercedes E-Class W212 (2011). First of all, remove the emergency key located inside the protective cover, then use it to remove the back cover and gain access to the battery you want to replace. At this point, remove the old battery and replace it with a new one of the same type. Finally, reassemble the back cover correctly and you are done.

Posted on 26 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Mercedes E-Class W212 key
How to replace the battery of the Mercedes E-Class W212 key
Mercedes Classe E (2009-2016 / W212) The replacement of the button battery inside the smart key of the Mercedes E-Class W212 is very simple and can be done in a few seconds. You do not n…
Where is the fuse box of the Mercedes E-Class W212 located?
Mercedes Classe E (2009-2016 / W212) In the following guide, we will explain the various steps you need to take in order to independently locate the fuse box inside your Mercedes E-Class…
Mercedes E-Class W212 key remote control battery replacement
Mercedes E-Class W212 key remote control battery replacement
Mercedes Classe E (2009-2016 / W212) In this video tutorial today we will see how to remove and replace the remote control battery of a Mercedes E-Class W212. First of all, let's take th…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos