Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil on the Mercedes Vito W447.

Model: Mercedes Vito MK 3, W447 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Engine oil

See other generations:
Video tutorial

On the Mercedes Vito/Class V W447, the oil change with filter replacement is performed with the vehicle turned off and safely. The car is lifted at the appropriate points, any underbody cover is removed, and a collection container is positioned under the oil pan. The drain plug is loosened, allowing the oil to drain out; then the oil filter is removed as shown, cleaning the seat and checking the washer of the plug.

Before installation, the gasket of the new filter is lubricated, and the plug is tightened according to the specified torque. The correct amount of oil is added through the filler neck, the engine is started for a few seconds to fill the filter, then turned off and the level is checked with the dipstick, topping up if necessary.

If the video includes the replacement of other filters, access the housings and proceed as shown: for the air filter, the airbox is opened and the panel element is inserted; for the cabin filter, the cover on the cabin side housing is removed; for the fuel filter, the cartridge is replaced and any bleeding is performed.

Finally, check for any leaks, restore the covers, and reset the service warning on the dashboard.


Posted on 9 December 2025 by ScegliAuto


Related tutorials

Where is the OBD2 Port on the Mercedes Vito W447?
Where is the OBD2 Port on the Mercedes Vito W447?
Mercedes Vito (2014-2024 / MK 3, W447) If you are curious about the location of the OBD2 port on your Mercedes Vito W447, simply read the following guide carefully and follow all the descr…
How to Reset the Service Light on the Mercedes Vito W447?
How to Reset the Service Light on the Mercedes Vito W447?
Mercedes Vito (2014-2024 / MK 3, W447) In the Mercedes Vito W447 version with multifunction steering wheel, the service light is reset using the buttons on the right and left spokes of the…
What Does the Fuse Diagram for the Mercedes Vito W447 Include?
What Does the Fuse Diagram for the Mercedes Vito W447 Include?
Mercedes Vito (2014-2024 / MK 3, W447) The fuse diagram for the Mercedes Vito W447, which applies to any other vehicle as well, consists of a graphical map that shows all the fuses present…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos