Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What Does the Message "Go to Workshop Without Changing Gears" Mean on a Mercedes Display?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

If the message "go to workshop without changing gears" appears on your Mercedes display, it means that the automatic transmission control system has detected an anomaly. To protect itself from potential damage, the transmission control unit locks the transmission in emergency mode (usually 2nd gear) and prevents gear changes.

This is a temporary mode or "limp mode". The most common cause is a weak or failing battery, as the transmission solenoids require stable voltage to operate. Another cause could be degraded transmission fluid that needs to be replaced.

Additionally, on high-mileage vehicles, the valve body, which is the brain of the transmission, may be failing (though this is quite rare). Do not ignore this warning: driving in limp mode can cause serious damage.


Posted on 20 September 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Mercedes E-Class
How to Reset the TPMS Light on a Mercedes E-Class
Mercedes Classe E (2023-2026 / W214) To reset the TPMS light on a Mercedes E-Class, turn on the ignition without starting the engine. On the steering wheel or the instrument cluster disp…
Is it Better to Do the Service Yourself or at a Mercedes Shop?
Is it Better to Do the Service Yourself or at a Mercedes Shop?
Mercedes Classe E (2016-2023 / W213) In this video, we address a question that any Mercedes owner has asked at least once in their life: Is it better to take the vehicle for service at a…
How to reset the automatic transmission of the Mercedes E-Class W211
How to reset the automatic transmission of the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) In the following article we will see how to reset the automatic transmission of the Mercedes E-Class W211, in case of slight shifting problems or lig…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos