Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Parking Sensors on a Mercedes SLK

Model: Mercedes Slk MK 2, R171 - Years 2004-2011
Part: Parking sensors

In this tutorial video, follow the essential steps to install parking sensors on a Mercedes SLK. After routing and connecting various wires to the control units, remove the mirror to insert the camera and feed the cables inside. Take appropriate measurements for drilling (once the bodywork is drilled, there's no going back!). Next, install the additional cameras for a complete view around the vehicle. The process can be a bit complicated and requires patience: follow the video to the end for further tips!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses on a Mercedes SLK?
Mercedes Slk (2011-2016 / MK 3, R172) The fuses on a Mercedes SLK are located in dedicated fuse boxes installed in the vehicle. This model has two fuse boxes. The first is situated on the…
How to replace the fog light bulb of the Mercedes SLK 350
How to replace the fog light bulb of the Mercedes SLK 350
Mercedes Slk (2004-2011 / MK 2, R171) In the following guide, we will describe the steps you need to follow in order to safely replace the fog light bulb of your Mercedes SLK 350. First o…
Dismantling the multimedia system of a Mercedes SLK
Dismantling the multimedia system of a Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) How to dismantle the multimedia system of a Mercedes SLK? Let's look at removing the covering pieces to access the radio. Open the cup holder and uns…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos