Do it yourself
Frequently asked questions about cars and motorcycles

Engine Oil and Oil Filter Replacement

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Engine oil

See other generations:
Video tutorial

Lift the vehicle on suitable car ramps or position it over a service pit to access the oil pan. Open the hood and locate the oil filter container: it is on the front right, near the power steering fluid reservoir; use the appropriate socket wrench to unscrew the cap and remove the filter cartridge, taking it out of its mount and inserting the new one while replacing the O-ring seals included in the package.

Next, remove the splash shield and unscrew the drain plug from the oil pan, collecting the oil in a suitable container; screw the plug back in when finished, reattach the splash shield and the oil filter.

Finally, fill the engine with new oil according to the SAE specifications and the quantities indicated in the owner's manual.


Updated on 7 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) Before starting, obtain the oil and the original replacement filter, then lift the car and secure it with appropriate supports so it cannot fall. The…
Mercedes Classe C (1993-2000 / W202) Lift the vehicle and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet wrench, a set of open-end wren…
Mercedes Classe C (2014-2021 / W205) This video explains what is done to your Mercedes-Benz C-Class 2203/204/205 during the A1 to A9 service intervals. Service A is the basic service: en…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos