Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : Coolant replacement

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Antifreeze liquid
Operation: Coolant replacement

The guide below shows us how to replace the radiator coolant. When the engine is cold, the coolant level must be between the maximum and the minimum. To avoid getting burned, the operation must be carried out with the engine not excessively hot. It must be replaced because it is a product that over time loses its properties, such as: antifreeze and anti-rust. For the necessary quantity, the vehicle registration document must be consulted. Once the engine is off, the cap of the expansion tank must be removed and the liquid dropped into a container. Once the circuit has emptied, screw the drain plug again, open the bleed valve and pour the liquid into the radiator.


Posted on 28 July 2023 by ScegliAuto



Check for coolant leaks
Mercedes Classe M (1997-2005 / W163) If the coolant level warning light comes on on the instrument panel display, check the level in the relevant reservoir. Once the front hood is open,
Replacement radiator fluid reservoir
Mercedes Classe M (1997-2005 / W163) If it is necessary to replace the coolant reservoir, it is recommended to proceed only after the engine has cooled completely; at this point, start b
How to intervene on the heat exchanger in the Mercedes ML
Mercedes Classe M (2005-2011 / W164) Below you will find a general description of the steps involved in replacing the heat exchanger, but please note that this is only an overview and th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos