Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : Replacement discs and rear pads

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Brake discs
Operation: Replacement discs and rear pads

Raise the car on the bridge and remove the rear wheel; remove the support spring of the pads and the caps of the fixing pins of the brake calliper to be able to disassemble it and extract the old pads; then disassemble the caliper support and the disc fixing screw in order to remove it from its seat; clean the disc seat on the hub with a metal brush and apply grease; then install the new disk fixing it with the relative screw and clean it of the protective oil; fit the caliper support, re-enter the caliper piston with the special clamp, insert the new pads, install the caliper and then the pad support spring.


Posted on 31 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos