Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the OM651 EGR Valve from a Mercedes

Model: Mercedes Classe C W204 - Years 2007-2013
Part: EGR valve

This video tutorial explains how to remove the EGR valve from a 2010 Mercedes C-Class. First, open the hood and remove the hard plastic cover protecting the engine. Next, start disassembling the valve by removing the screws, then disconnect the electrical connector. At this point, you can extract the valve and proceed to clean it using specific products. If the valve is damaged, replace it with a new one. To install the new valve, simply reverse the process.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the EGR valve of the Mercedes C Class 2.0 CDI
How to remove the EGR valve of the Mercedes C Class 2.0 CDI
Mercedes Classe C (2000-2007 / W203) In this short and simple guide, we will see how to disassemble and clean (or replace) the EGR valve of the Mercedes C Class 2.0 CDI. First of all, op…
Removing the EGR Valve from the Mercedes C-Class CDI
Removing the EGR Valve from the Mercedes C-Class CDI
Mercedes Classe C (2000-2007 / W203) Follow these steps to remove and replace the EGR valve on the Mercedes C-Class CDI. First, open the hood and disconnect the rubber hose from the EGR …
How to disassemble the EGR valve of a Mercedes C-Class?
How to disassemble the EGR valve of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) Good morning, today we will focus on how to disassemble the EGR valve of our Mercedes C-Class. To begin, carefully open the front engine hood using t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos