Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the airbag from the Mercedes Benz C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Airbags
Operation: How to remove the airbag from the Mercedes Benz C-Class

Removing the airbag of the Mercedes Benz C-Class is a very simple operation. To remove the airbag and then the steering wheel, first insert a 30mm torx key into the side hole. Then you will need to release the central part of the steering wheel where the airbag and horn are located, to completely remove it you will need to disconnect the connectors. Once these elements are removed, you can remove the body and then move on to the steering wheel, using a torx key to remove the screws and detach the steering wheel from its seat. In these circumstances, it is always useful to disconnect the car battery to prevent the airbag system from activating during disassembly.


Posted on 22 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - What does the malfunction of the restraint system indicate, in the Mercedes C-Class W204? Read Answer
    • Classe C 2007-2013 - What does the message "front right - fault" mean with the airbag warning light in the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - SRS fault restraint warning light, what does it mean? Read Answer
    • Classe C 2007-2013 - How to turn off SRS warning light on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos