Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How do you open the door of the MG ZS when the battery is low?

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Checks and maintenance
Operation: How do you open the door of the MG ZS when the battery is low?

If the MG ZS battery is flat it will not be possible to open the car with the special button on the remote control: this problem can be circumvented by pressing the button on the remote control, so that the key can be raised. It will be necessary to insert the key inside the hole located under the door handle: by levering inside this hole it will be possible to remove the cover, in order to access the underlying lock. By doing so, it will be possible to insert the key inside the lock so that the door opens giving access to the passenger compartment.


Posted on 19 May 2024 by ScegliAuto



How to replace the MG ZS remote control battery?
MG ZS (2017-2024 / Zs11) Replacing the MG ZS remote control battery, as we can see in this tutorial, is a very simple and economical operation. To do this, we will need a rep
Removing the MG ZS front door panel
MG ZS (2017-2024 / Zs11) Today we will see, in this video tutorial, how to remove and replace the front door panel of the MG ZS, in simple and quick steps. First of all we op
How to remove the rear door panel of the MG ZS
MG ZS (2017-2024 / Zs11) Below we find the step-by-step instructions for disassembling and replacing the rear door panel of the MG ZS, by following these simple steps. First

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos